Aw bɛ yan: So » Baara minnu bɛ kɛ » Pikiri kɛli baarakɛlaw ka baarakɛyɔrɔw » Plastiki pikiri kɛcogo

Plastiki pikiri kɛcogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Plastiki ye pikiri kɛli ye fɛɛrɛ jɔnjɔn ye fɛnw dilanni na, yɔrɔ min na plastiki wulilen bɛ don bɔgɔdaga kɔnɔ.Nin cogo in nafa ka bon tiɲɛ na walasa ka plastiki yɔrɔw dilan ka kɛɲɛ ni mɔgɔw sago ye ka ɲɛ ani ka teliya.TEAM MFG MFG la, an bɛ waso k’aw ka dilan hakilinaw tigɛli kɛ fɛn lakikaw ye ni an ka Plastic Injection Molding yeAn bɛ bi atelierw sɔrɔ minnu bɛ se ka porozɛ suguya caman ɲɛnabɔ.I mago bɛ fɛn dɔ la min ɲɔgɔn tɛ, min tɛ kelen ye, walima fɛn damadɔw dɔrɔn, an bɛ se k’u dilan.An bɛ baara kɛ joona, o la aw hakilinaw bɛ kɛ fɛn dilannenw ye joona, gɛlɛya foyi tɛ u la.

AW KA AW KA ƝƐSIN ƝƐNABƆLI LA

TEAM MFG ka baarakɛcogo min bɛ kɛ ni plastiki pikiri kɛcogo ye

Mun na TEAM MFG ka plastiki pikiri kɛcogo

Ɲɛnabɔli waati teliya ani fɛn suguya caman

An ka ɲɛminɛ waati bɛ daminɛ baarakɛdon 7 dɔrɔn na, ka fara quotation jaabi teliya kan ni design-for-manufacturing feedbacks ye.An bɛ baara kɛ ni plastiki caman ye, ka sɔrɔyɔrɔw ni ɲɔgɔndanw di minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye walasa k’aw ka ɲinini kɛrɛnkɛrɛnnenw dafa.

Masina kura

An ka masinw kɔnɔ, fɛn kelen, caman bɛ minnu na, ani denbaya ka mɔliw, minnu bɛ daminɛ 50 na ka se 1100+ ma, minnu bɛ se ka kɛ ni presse tonnage ye.An bɛ kɛrɛfɛ walew fana kɛ i n’a fɔ bololabaarakɛminɛnw walasa ka dilancogo gɛlɛnw kɛ.TEAM MFG MFG bɛ baara kɛ ni ji ni kuran pikiri masin kɔrɔlenw ye.O masinw ye fɛnba ye an ka seko la ka yɔrɔw dilan ni tiɲɛni ni teliyaba ye.

Jogoɲumanya ni Tiɲɛni sabatili sabati

An ka cɛsiri ka ɲɛsin jogoɲumanya ma, o tɛ wuli.Anw minnu ye ISO 9001:2015 ani ITAR ka tɔn sɛbɛnnen ye, an bɛ tugu jogoɲumanya sɛgɛsɛgɛli sariyaw la minnu ka bon kosɛbɛ.K’a ta design for manufacturability (DFM) jaabiw la ka se CMM sɛgɛsɛgɛli ma min bɛ kɛ baara kɔnɔ ani masinw kɔlɔsili la, sen bɛɛ bɛ sɛgɛsɛgɛ walasa ka ɲɛtaa sabati.

Precision ani consistency ka ɲɛsin fɛn dilanni ma

An ka mɔbili muɲuniw bɛ tigitigi kosɛbɛ, ni segin-ka-bɔnyew ye yɔrɔ ni yɔrɔ ani fɛn kɔrɔlenw muɲuli minnu bɛ jogoɲumanya sabati yɔrɔ bɛɛ la.Muɲuli bɛ se ka gɛlɛya fo ka se 0,01mm ma fɛn kɔrɔlenw na.

Mɔgɔ dilanni fɛɛrɛ dɔnbagaw

An ka mɔbili dilanni fɛɛrɛw dilannen don walasa ka porozɛ kelen-kelen bɛɛ mago gɛlɛnw ɲɛ, ka mɔbili baara kɛcogo ɲuman ni a yɔrɔ dɔ cogoya ɲuman sabati.

Prototyping to Large Volume Production

K’a ta prototype injection molding na ka se volume large production ma, an ka sekow bɛ fɛn caman dilanni ɲininiw bɛɛ lajɛlen na.

Plastiki pikiri kɛcogo fɛnw

K’a ta ABS ni Polycarbonate la ka se PEEK ni PETG ɲɛtaa ma, an ka fɛnw bɛ sugandi ka...

aw ka porozɛw ka baarakɛcogo ni ɲɛnajɛko mago suguya caman ɲɛnabɔ.

ABS (ABS) ye	PC
ABS+30%GF ye	PC+10%GF ye
ASA ye	PC+ABS ye
HDPE (HDPE) ye	PMMA ye
TƆ̀GƆ	POM ye
LDPE (LDPE) ye	PP (PP) ye
PA6	PP+20%TALC ye
PA6+15%GF ye	PPSU ka baarakɛyɔrɔ
PA6+30%GF ye	PPO +30%GF ye
PA66	PS
PA66+25%GF ye	PVC ye
PA66+30%GF ye	SAN
PBT ye	TPE (TPE) ye
PBT+30%GF ye	TPU (TPU) ye

Galeri min bɛ Plastiki Pikiri Moulded Parts

Baara kɛli ni Industri suguya caman ye

TEAM MFG ka ɲi kosɛbɛ plastiki pikiri dilanni na baara suguya wɛrɛw kama.An bɛ yɔrɔ gɛlɛnw ni tigitigiw dilan mobili kama, k’u kɛ lakana ye ani ka ɲɛ.Kɛnɛyako la, an bɛ yɔrɔ caman dilan furakɛli baarakɛminɛnw na, k’a lajɛ k’u ka ɲi kosɛbɛ ani k’u saniya.An bɛ baara kɛ fana ni fɛnw ye mɔgɔw bɛ baara kɛ ni minnu ye don o don ani ɛntɛrinɛti.O b’a jira cogo min na an bɛ se ka baara suguya caman kɛ ni plastiki suguya caman ye ani an ka fɛn dilanni fɛɛrɛ kɛrɛnkɛrɛnnenw.

Auto
Réseau kabɔri
Ɛntɛrinɛti kan
Otomatiki Industri
Tile fanga
Dɔgɔtɔrɔso Masinaw

Plastiki pikiri kɛcogo Ɲininkaliw

Q Ne bɛ se ka quotation sɔrɔ joona cogo di?

A An bɛ quotation teliya di, tuma caman na sanga damadɔ kɔnɔ i ka ɲinini kɔfɛ, ka taabolo teliya ni nafama sabati.
Q Yala aw bɛ se ka prototyping mago kɔrɔtɔlenw walima teliyalenw ɲɛnabɔ wa?

A Ɔwɔ, an kɛrɛnkɛrɛnnen don prototyping teliya la ani an bɛ se ka prototypes custom lase fɛnw jiginni waatiw la minnu teliyalen don kosɛbɛ.
Q Porozɛ sugu jumɛnw bɛ se ka nafa sɔrɔ aw ka plastiki pikiri kɛcogo la?

A An ka baarakɛminɛnw ka ɲi kosɛbɛ porozɛ caman kama, i n’a fɔ prototypew dilanni, u dilanni hakɛ dɔgɔman, ani baara laban yɔrɔw la izini suguya caman kɔnɔ.
Q Yala aw bɛ se ka kulɛri suguya caman ladon fɛn kelen na wa?

A Ɔwɔ, an bɛ kulɛri suguya caman di fɛn kelen ma, ka kɛɲɛ ni dilancogo kɛrɛnkɛrɛnnenw ye.
Q Jɔn bɛ mɔbili in tigiya mara?

A Kunnafonidila de ye mɔbili tigi ye, wa an bɛ ladonni baara kɛ walasa a ka mɛn ani a ka baara kɛ.
Q Danfara jumɛn bɛ moulding ni 3D printing cɛ?

A Molding ka ɲi kosɛbɛ fɛn dilanni na ni hakɛ caman ye ni jogo sabatili ye, k’a sɔrɔ 3D sɛbɛnni bɛnnen don kosɛbɛ prototypes ni hakɛ dɔgɔman, yɔrɔ gɛlɛnw ma.
Q Industri jumɛnw bɛ nafa sɔrɔ aw ka pikiri kɛcogo la?

A An ka baarakɛminɛnw bɛ baara caman kɛ, i n’a fɔ mobili, sanfɛla, furakɛli ani mɔgɔw ka fɛnw.