Ni a bɛ fɔ nɛgɛ yɔrɔw dilanni ma, ka surface fini dafalen sugandi, o nafa ka bon kosɛbɛ. Kiɲɛn fɛ, a tɛ dan a ɲɛda cogoya ma dɔrɔn, nka a bɛ a muɲuni ni a sɔgɔli fana ɲɛ.
Sugandili fila minnu bɛ fɔ kosɛbɛ, olu ye anodizing ani powder coating ye. Anodizing ye kuran-sɛnɛcogo ye min bɛ ɔkisizɛni lakanani-yɔrɔ dɔ Dabɔ nɛgɛ kan. Nin layini in ka gɛlɛn ka tɛmɛ basigi nɛgɛ kan, a bɛ sɛgɛn ni sɔgɔli kɛcogo ɲuman di.
Faan wɛrɛ fɛ, mugu dacogo bɛ kɛ ka mugu jalen dɔ kɛ nɛgɛ la ni kuran ye. O kɔfɛ, a yɔrɔ min datugulen don, o bɛ sumaya, o bɛ kɛ sababu ye ka mugu in wuli ka a kɛ finimugu ye min bɛ mɛn, a bɛ mɛn.
O fɛɛrɛ fila bɛɛ bɛ nafa kɛrɛnkɛrɛnnenw di, o b’a to a nafa ka bon u ka danfara faamuya walasa ka sugandi ɲuman sugandi i ka baara kɛrɛnkɛrɛnnen kama.
Anodizing bɛ mun kɛ?
Anodizing ye kuran-sɛnɛ ye . Surface fini min bɛ kɛ ɔkisizɛni lakanani layɛrɛ ye nɛgɛ sanfɛ. A b’u tanga nɔgɔ ni sɛgɛn ma.
Anodizing bɛ baara kɛ cogo di?
Electrochimique (Elektrokimiki) kɛcogo ɲɛfɔra .
Anodizing bɛ baara kɛ ni nɛgɛ su ji la elektrɔli jilama kɔnɔ. Kuran bɛ kɛ, o bɛ kɛ ka ɔkisizɛni lakanani dɔ dilan nɛgɛ kan.
O kɛcogo bɛ nɛgɛ ka muɲuli, a ka sɔgɔli, ani a ka ɲɛnajɛko ɲɛnajɛ bonya.
Minɛn minnu ka kan ka kɛ walasa ka anodize .
L Anodizing Tank (rectificateur) .
L Jidagayɔrɔ .
L DeGreaser .
L Koli min bɛ kɛ .
Anodizing procedure senfɛ-senfɛ .
1. Surface Preparation: Aw bɛ a yɔrɔ saniya ka ɲɛ.
2. Electrolyte bath: Aw bɛ a yɔrɔ su ji la elektrɔliji la.
3. Kuran bɛ sɔrɔ yɔrɔ min na: Aw bɛ kuran dɔ kɛ ka oksizɛni layɛrɛ kɛ.
4. Siginiden: Aw bɛ ɔkisizɛni lamini datugu ni finimugu ye.
Ladilikanw ka ɲɛsin anodizing nafama ma .
l Aw bɛ a lajɛ ni a bɛ yɔrɔ labɛncogo ɲuman na walasa ka ɲɛtaa ɲuman sɔrɔ.
l Aw bɛ tension ni a kuntaala kɔlɔsi walasa ka se ka oxyde layer thickness ɲininen sɔrɔ.
Nɛgɛ minnu bɛnnen don anodizing ma .
Anodizing bɛ kɛ ka caya:
L Aluminiyɔmu .
L Titanium .
L Magnésium .
Nafa minnu bɛ sɔrɔ anodizing .
1. Aw bɛ dɔ fara a ka muɲuli kan ani a ka sɔgɔsɔgɔli kan .
Anodized layer bɛ nɛgɛ tanga sɔgɔli ni sɛgɛn ma.
2. Aw bɛ sɛgɛn ni sɔgɔsɔgɔninjɛ kunbɛncogo ɲɛ .
Anodized surfaces ka gɛlɛn ani u bɛ se ka sɔgɔsɔgɔ.
3. Aesthetic appeal enhanced .
Anodizing (anodizing) bɛ kɛ sababu ye ka fɛn nafama ye, min bɛ kɛ ni nɛgɛ ye.
4. Aw bɛ nɔrɔ pentiw ni finimuguw la ka ɲɛ .
A yɔrɔ min bɛ wele ko porose, o bɛ kɛ sababu ye ka pentiw ni finimuguw nɔrɔ ka ɲɛ.
Dantigɛli minnu bɛ kɛ ni anodized coatings ye .
1. Cost Factors .
Anodizing bɛ se ka sɔngɔ gɛlɛya ka tɛmɛ finimugu dacogo tɔw kan.
2. Kulɛri ni fini dantigɛli .
Anodizing kulɛri suganditaw dan ye ka tɛmɛ mugu dacogo kan.
Anodized yɔrɔw baarakɛcogo .
Anodized parts (yɔrɔ anodizelenw) bɛ kɛ izini suguya caman na, i n’a fɔ:
L Mobili .
L Aerospace .
l Electronics consommateurs .
l Architectural Components .
Walasa ka kalan wɛrɛw sɔrɔ o kɛcogo kelenw kan ani u nafaw kan, aw ye sɛbɛn ɲɛ 10 lajɛ . Alodine fini - gafe dafalen - ekipu MFG ani . Reaming - Nafa minnu bɛ se ka sɔrɔ, gɛlɛya minnu bɛ se ka sɔrɔ, ani laadilikanw ka ɲɛsin reaming baara ɲɛtaa ma - Team MFG ..
Faamuyali mugu dacogo .
Mugu dacogo ye mun ye?
mugu dacogo ye finimugu jalen ye. O ye mugu jalen ye min bɛ bɔ a yɛrɛ la, a bɛ kɛ ka a kɛ yɔrɔ dɔ la. A ka ca a la, mugu bɛ kɛ polimɛri ye min bɛ kɛ ni funteni ye walima min bɛ kɛ ni funteni ye.
A bɛ sumaya ka fini gɛlɛn, min bɛ mɛn, min ka gɛlɛn ka tɛmɛ penti kɔrɔlen kan. Powder Coating bɛ baarakɛcogo lakanani ni a masiricogo caman di.
mugu dacogo bɛ baara kɛ cogo di?
Electrostatique spray deposition fɛɛrɛ .
Powder Coating bɛ baara kɛ ni elektɔsitatiki fiyɛli deposition (ESD) ye. Furakɛli marifa bɛ charge électrostatique kɛ mugumafɛnw na. O b’u sama ka na dugukolo kan.
O kɔfɛ, a yɔrɔw datugulen bɛ bila furakɛli-yɔrɔ la. O dacogo bɛ kɛ ni kemikɛli ye walasa ka cakɛda janw dilan minnu bɛ kɛ ni molekiyɔmuw ye.
Minɛn minnu ka kan ka kɛ walasa ka mugu da .
L Powder Coating Gun .
l Foro .
L Furakɛcogo .
L Powder Coating Booth .
Aw bɛ mugu dacogo kɛ senfɛ-senfɛ .
1. Sani furakɛli ka kɛ: Aw bɛ a yɔrɔ saniya ni kemikaliya ye.
2. Sani ka sumaya: Aw bɛ nɛgɛ sumaya fo ka se 400°F ma.
3. mugu kɛcogo : Aw bɛ mugu kɛ ni marifa ye min bɛ kɛ ni kuran ye.
4. Furakɛli: Aw bɛ nɛgɛ dacogo furakɛ foro kɔnɔ 400°F.
5. Nɛnɛ ni sɛgɛsɛgɛli: Aw bɛ a to a ka nɛnɛ ani ka a lajɛ ni fiɲɛ tɛ a la.
Ladilikanw ka ɲɛsin mugu dacogo ɲuman ma .
l Aw bɛ a lajɛ ni a yɔrɔ bɛ dugukolo kan ka ɲɛ walasa a ka kɛ mugu ye.
l Aw bɛ foro funteni ni a furakɛli waati kɔlɔsi walasa ka ɲɛtaa ɲuman sɔrɔ.
Nɛgɛw ni substrat minnu bɛnnen don mugu dacogo ma .
mugu dacogo bɛ baara kɛ nɛgɛ ni substrat suguya caman kan, i n’a fɔ:
L Aluminiyɔmu .
L A bɛ baara kɛ ni nɛgɛ ye .
L Plastiki dɔw .
L Glass .
L Fibreboards .
Nafa minnu bɛ sɔrɔ mugu dacogo la .
A bɛ se ka muɲu ani ka a yɛrɛ tanga bana ma .
mugu dacogo bɛ mɔgɔ tanga kosɛbɛ nɔgɔ ni sɛgɛn ma.
A ka ca a la, a bɛ se ka kɛ ko a bɛ se ka kɛ .
Powder Coating bɛ kulɛriw ni fɛnw caman dilan.
Uniform coverage .
Elektɔsitatiki baarakɛcogo bɛ hali a datugu yɔrɔ bɛɛ la.
musaka-nafa .
A ka c’a la, mugu dacogo ka nɔgɔn ka tɛmɛ anodizing kan. ( .Alodine fini - A guide dafalen - ekipu MFG ) .
Dantigɛli bɛ kɛ mugu dacogo la .
Farikolo ni UV tiɲɛniw ka se ka kɛ fɛn ye min bɛ se ka kɛ .
mugu dacogo bɛ se ka kɛ chipping ni UV tiɲɛni ye waati kɔnɔ.
Powder-coated yɔrɔw baarakɛcogo .
Yɔrɔ minnu bɛ kɛ ni mugu ye, olu bɛ kɛ baara suguya caman na, i n’a fɔ:
L Mobili .
L minɛnw .
L meubles .
l architectural elements .
Walasa ka kunnafoni wɛrɛw sɔrɔ SNAP-FIT Joints baarakɛcogo ɲuman kan baarakɛcogo caman na, aw bɛ se ka taa . SNAP-FIT Joints: A suguyaw, a nafaw, ani a kɛcogo ɲumanw - Team MFG ..
Anodizing ni mugu dacogo suma .
Ni aw bɛ sugandili kɛ anodizing ni powder dacogo cɛ, fɛn caman bɛ na baara la. An ka nin fini fila ninnu suma ɲɔgɔn na ka da jogo jɔnjɔnw kan.
A bɛ se ka muɲu ani ka a yɛrɛ tanga bana ma .
Anodizing: a bɛ mɛn kosɛbɛ ani a bɛ se ka a yɛrɛ tanga bana ma .
Anodizing bɛ layɛrɛ gɛlɛn, jɛlen dɔ dilan min bɛ muɲuli ni sɔgɔli kunbɛncogo ɲuman di. A bɛ lakana kuntaalajan di aluminiyɔmu yɔrɔw ma.
mugu dacogo: a muɲuni ɲuman ani a sɔgɔli .
Powder dacogo bɛ muɲuli ɲuman ni sɔgɔli kɛcogo ɲuman di. Nka, a bɛ se ka kɛ ko a tɛ se ka muɲu ka tɛmɛ anodizing kan, kɛrɛnkɛrɛnnenya la sigida gɛlɛnw na.
Kulɛri suganditaw ani ɲɛnajɛw .
Anodizing: Kulɛri suganditaw, nɛgɛ yecogo .
Anodizing bɛ kulɛri suguya caman di nka a bɛ kɛ cogo nafama na, nɛgɛ bɛ min na. A laban bɛ nɔgɔya ani a bɛ mɔgɔ ɲɛnajɛ.
mugu dacogo: a kulɛriw ni a kɛcogo caman .
Powder Coating bɛ kulɛri suguya caman di ani a kɛcogo. A bɛ sira Di mɔgɔw ma minnu bɛ Se ka fɛnw Labɛn ka ɲɛ ani minnu bɛ Se ka Kɛ ni u dilanni ye.
musaka ni musaka dɔgɔyali .
Anodizing: A ka c’a la, a sɔngɔ ka gɛlɛn .
Anodizing ka teli ka kɛ musaka ye ka tɛmɛ mugu dacogo kan. A bɛ minɛnw ni taabolo kɛrɛnkɛrɛnnenw de wajibiya, minnu bɛ se ka dɔ fara musakaw kan.
Poudre de couverture .
A ka c’a la, mugu dacogo bɛ musaka bɔ, kɛrɛnkɛrɛnnenya la porozɛbaw kama. A ka fɛnw ni a ka baarakɛcogo musakaw ka dɔgɔ ni anodizing ye.
Sigida laminiko gɛlɛya .
Anodizing .
Anodizing ye sigida lakanani baara ye. A tɛ fɛnɲɛnamafagalanw (VOC) bɔ walima ka bɔgɔ faratilenw bɔ.
Poudre de couverture .
Powder dacogo bɛ tiɲɛni dɔɔni kɛ ani VOC bɔli ka dɔgɔn. O ye jiri ye min ka ɲi ka tɛmɛ laadala jilamaw kan.
A ka bon ani a ka bonyali .
Anodizing: fɛn fitininw caman yeli, layɛrɛ lakanani finman .
Anodizing bɛ layɛrɛ finman, min bɛ mɔgɔ tanga, o bɛ kɛ sababu ye ka fɛn caman Changements dimensionnels (Yɛlɛma hakɛ fitinin) kɛ a yɔrɔ la. A bɛnnen don yɔrɔw ma minnu ka muɲuli ka gɛlɛn.
mugu dacogo: Datugulan min ka bon, o bɛ se ka ladilanni kɛ walasa ka muɲuli gɛlɛnw kɛ .
mugu dacogo bɛ kɛ fɛn ye min ka bon kosɛbɛ a sanfɛla la. A bɛ se ka kɛ ko ladilanni bɛ kɛ walasa ka muɲuli gɛlɛnw walima hakɛ tigitigiw sɔrɔ.
jogoɲumanw . | Anodizing . | Poudre de couverture . |
A bɛ se ka muɲu . | Ɲuman ɲuman | Duman |
Corrosion resistance . | Ɲuman ɲuman | Duman |
Kulɛri suganditaw . | Limited . | A ka ca . |
musaka-nafa . | Jɛnkulu ka sɔngɔ gɛlɛn . | A ka ca ni musaka ye . |
Sigida laminiko gɛlɛya . | Eco-Friendly, No VOCs . | Tiɲɛni fitininw, VOCw ka dɔgɔ . |
A ka bon kosɛbɛ . | Layɛrɛ finman, fɛn fitininw b'a la . | A ka bon ni a ye, a bɛ se ka kɛ ka ladilanni kɛ . |
Fɛn minnu ka kan ka jateminɛ ni aw bɛ sugandili kɛ anodizing ni mugu dacogo la .
Aw bɛ anodizing ni powder dacogo latigɛ aw ka nɛgɛ yɔrɔw la wa? Aw ye o ko jɔnjɔnw jateminɛ walasa ka sugandili ɲuman kɛ aw ka baarakɛcogo la.
Nɛgɛ walima substrat suguya .
Nɛgɛ walima substrat suguya ye ko kɔrɔba ye. Anodizing bɛ baara kɛ ka ɲɛ aluminiyɔmu ni titanium kan. mugu dacogo bɛnnen don nɛgɛ ni substrat caman ma.
A bɛ ɲini ka kɛ cogo min na ani ka kulɛri sugandi .
I ka miiri i ka yɔrɔ lajɛcogo la min b’a la. Anodizing bɛ kɛ sababu ye ka ɲɛ, nɛgɛmafɛnw yecogo nka u kulɛri dan ye. Powder Coating bɛ kulɛriw ni fɛnw camanba di walasa ka ladamu caman sɔrɔ.
A ka kan ka muɲu ani ka a yɛrɛ tanga bana ma .
Aw bɛ a jateminɛ ko a ka kan ka muɲu ani ka a kɛ ko a bɛ se ka a yɛrɛ tanga. Anodizing bɛ muɲuli ɲuman ni sɔgɔli kɛcogo ɲuman di. A ka ɲi yɔrɔw ma minnu bɛ sigida gɛlɛnw na. Powder Coating bɛ lakana ɲuman di nka a bɛ se ka kɛ ko a tɛ mɛn ka tɛmɛ anodizing kan.
Aplikasi ni labanko sigida .
Baara bɛna kɛ ni yɔrɔ min ye, o bɛna kɛ cogo min na ani yɔrɔ min na, i ka miiri o la. Anodizing ye dafalen ye yɔrɔw la minnu ka kan ka muɲu cogoya juguw la. mugu dacogo bɛ se ka kɛ fɛn caman ye, wa a bɛnnen don baara suguya caman ma.
baarakɛnafolo ni musaka jateminɛw .
Aw ka baarakɛnafolo jɔyɔrɔ ka bon o latigɛ in na. A ka c’a la, anodizing sɔngɔ ka gɛlɛn ka tɛmɛ mugu dacogo kan. mugu dacogo bɛ musaka bɔ, kɛrɛnkɛrɛnnenya la porozɛbaw kama.
Sigida sariyaw ani sabatili kuntilenna .
Ni sigida sabatili ye ɲɛtaa fɔlɔ ye, nafa bɛ o taabolo fila bɛɛ la. Anodizing ye eco-friendly ye, VOC walima farati farati tɛ min na. Powder dacogo bɛ tiɲɛni dɔɔni ni VOC bɔli dɔgɔya.
Fɛn | Anodizing . | Poudre de couverture . |
Metal/Substrate . | Aluminiyɔmu, Titanium . | Nɛgɛ ni substrat caman . |
Yecogo | nɛgɛ, danma kulɛriw . | Kulɛriw ni sɛbɛnniw camanba camanba . |
A bɛ se ka muɲu . | Ɲuman ɲuman | Duman |
Corrosion resistance . | Ɲuman ɲuman | Duman |
Waleyali | Kow bɛ kɛ cogo min na . | Nafacaman |
Sɔngɔ | A sɔngɔ ka gɛlɛn . | A musaka ka dɔgɔ . |
Sigida laminiko gɛlɛya . | Eco-Friendly, No VOCs . | Tiɲɛni fitininw, VOCw ka dɔgɔ . |
Ni aw ye o kow jateminɛ koɲuman, aw bɛ se k’a dɔn ni anodizing walima powder dacogo ye sugandili ɲuman ye aw ka baara kɛrɛnkɛrɛnnen na. Aw bɛ se ka kunnafoni wɛrɛw sɔrɔ baarakɛcogo kan minnu bɛ kɛ ka nɛgɛ yɔrɔw dilan minnu bɛ mɛn . Die casting daminɛ - Team MFG ..
Anodized ani powder-coated surfaces ladonni ni u ladonni .
Ladonni ɲuman ye fɛnba ye walasa ka aw ka anodize walima powder-coated surfaces to u ɲɛ ka bon. Ladilikan dɔw filɛ nin ye minnu bɛ se k’aw dɛmɛ u ka u ladon.
Saniya ni ladonni Ladilikanw ka ɲɛsin yɔrɔw ma .
Aw bɛ to ka anodize yɔrɔw saniya ni safinɛ ye min ka nɔgɔn.
Aw bɛ aw yɛrɛ tanga fɛnw ma minnu bɛ kɛ ni fɛn dɔw ye walima ni u bɛ kɛ ni fɛn gɛlɛnw ye. U bɛ se ka anodized fini tiɲɛ.
Aw bɛ aw yɛrɛ tanga funteni jugumanba ma walima fɛnw ma minnu bɛ kɛ ka ɲɛ. U bɛ se ka kɛ sababu ye ka sɛgɛn ka kɔn a waati ɲɛ.
's and donts for anodized surface care
| do | . |
| Aw bɛ safinɛ nɔgɔman kɛ . | Aw bɛ baara kɛ ni fɛnw ye minnu bɛ kɛ ka fɛnw sɔgɔ . |
| Aw bɛ to ka a saniya . | Aw bɛ kemikɛli gɛlɛnw kɛ . |
| Aw bɛ a ko ka ɲɛ . | Aw bɛ a bɔ kɛnɛ kan fo ka se funteni jugumanba ma . |
Saniya ni ladonni Ladilikanw ka ɲɛsin yɔrɔw ma minnu datugulen don ni mugu ye .
Aw bɛ to ka muguw kɛ ka u datugu ni finimugu nɔgɔlen ye ani ka safinɛ nɔgɔman dɔ kɛ.
Aw bɛ aw yɛrɛ tanga fɛnw ma minnu bɛ kɛ ni fɛn dɔw ye walima ni u bɛ kɛ ni fɛn gɛlɛnw ye. U bɛ se ka kojugu kɛ mugu dacogo la.
Aw bɛ mugu-da-yɔrɔw tanga tile yeelen ni ji ma mɛn. U bɛ se ka kɛ sababu ye ka u fasa walima ka u tiɲɛ.
do's and donts for powder-coated surface care
| do | tɛ . |
| Aw bɛ finimugu nɔgɔlen kɛ . | Aw bɛ baara kɛ ni fɛnw ye minnu bɛ kɛ ka fɛnw sɔgɔ . |
| Aw bɛ safinɛ nɔgɔman kɛ . | Aw bɛ kemikɛli gɛlɛnw kɛ . |
| Aw bɛ to ka a saniya . | Aw bɛ tile yeelen ni ji bɔ a la waati jan kɔnɔ . |
Anodized walima powder-coated surfaces tiɲɛnenw dilan .
Ni aw ka anodized walima powder-coated surface tiɲɛna, aw kana aw hakili ɲagami! Fɛɛrɛw bɛ yen minnu bɛ se k’a dilan.
Ni aw bɛ sɔgɔsɔgɔninjɛ walima chips misɛnniw kɛ, aw bɛ se ka touch-up penw walima pentiw dɛmɛ.
Ni aw b’a fɛ ka tiɲɛni caman kɛ, aw bɛ taa finitigiw ka baarakɛyɔrɔ dɔ lajɛ.
U bɛ se ka tiɲɛniw jateminɛ ani ka wale kɛcogo ɲuman fɔ.
Tuma dɔw la, a bɛ se ka kɛ ko a ka kan ka anodizing (nodizing) kɛ walima ka a da tuguni.
Ni aw ye nin ladonni ni ladonni ladilikanw labato, aw bɛ se ka aw ka anodize walima powder-coated surfaces to ka ɲɛ kosɛbɛ san nataw kɔnɔ! Aw ye kunnafoni wɛrɛw sɔrɔ o yɔrɔw marali kan . -Casting masin ladonni cogo di? - Ekipu MFG ..
Kuncɛli
Kuma surun na, anodizing ni powder dacogo bɛ nafa danfaralenw di nɛgɛ yɔrɔw lakanani n’u bonya ma. Anodizing bɛ muɲuli ɲuman di, ka sɔgɔli kɛ, ani ka nɛgɛ yecogo ɲuman di, ka sɔrɔ mugu dacogo bɛ kulɛri caman di, ka fɛnw kɛ, ani ka musaka caman bɔ.
Ni aw bɛ nin fini fila ninnu sugandi, a nafa ka bon aw ka aw ka wajibi kɛrɛnkɛrɛnnenw jateminɛ, i n’a fɔ nɛgɛ suguya, cɛɲi ɲininen, ani baara laban sigida. Ni aw ye aw lajɛ ni surface finishing experts ye, o bɛ se k’aw dɛmɛ ka desizɔn ta ka ɲɛ ani ka ɲɛtaa ɲuman sɔrɔ aw ka ɲinini na.
Team MFG la, an ka dɔnniya jɛkulu labɛnnen don ka laadilikanw di mɔgɔ yɛrɛ ma ani k’aw bilasira ka taa laban dafalen na aw ka poroze kama.
Ɲininkaliw jaabiw .
J: Yala aw bɛ se ka mugu da yɔrɔw kan minnu tɛ anodi ye wa?
A: mugu dacogo anodized yɔrɔw kan, o bɛ se ka kɛ nka a man ɲi. A bɛ se ka kɛ sababu ye ka fini dɔ sɔrɔ min tɛ mɛn ani min tɛ se ka sɔgɔ ni a bɛ tali kɛ anodizing kelen na.
J: Anodized ani powder-coated finiw bɛ mɛn?
A: Anodized ani powder-coated finiw bɛɛ bɛ mɛn ani u bɛ mɛn. Ni u ladonni ka ɲi, u bɛ se ka yɔrɔw lakana san caman kɔnɔ, hali sigida gɛlɛnw na.
J: Yala anodized walima powder-coated yɔrɔw bɛ se ka segin ka kɛ fɛn wɛrɛw ye wa?
A: Ɔ̀wɔ, yɔrɔ minnu ye anodize ye ani minnu bɛ Kɛ ni mugu ye, olu bɛ Se ka Kɛ ‘fɛn ye. O dacogo tɛ nɛgɛ jukɔrɔla ka segin-ka-bɔ-cogo-kɛcogo bali.
J: Yala dan bɛ yɔrɔw bonya la minnu bɛ se ka kɛ anodi ye walima ka u kɛ mugu ye wa?
A: Yɔrɔ minnu bɛ se ka kɛ anodize walima mugu ye, olu hakɛ bɛ bɔ minɛnw ni fɛnw na minnu bɛ sɔrɔ. Finitigiw ka baara fanba bɛ se ka kɛ yɔrɔ caman na.
