Rubber Molding Savis .

Insay di sosayti we de naw, rɔba prɔdak dɛn gɛt sɔntin fɔ du wit wi layf. Fɔ ɛntapraiz, fɔ shep rɔba insay difrɛn kayn kraft prɔdak dɛn na prɔblɛm. Tim MFG gɛt pas tɛn ia we di industri dɔn ɛkspiriɛns na di fild fɔ rɔba moldin savis. Wi de gi top-notch kɔstɔm rɔba moldin savis fɔ mit di prɛsis nid dɛn fɔ difrɛn industri dɛn.
 
Yu de ya: Os » Savis dɛn . » Injɛkshɔn moldin savis dɛn . » Rɔba moldin savis

Rɔba moldin savis dɛn we Tim MFG de gi .

Rubber injekshɔn moldin savis .

Wi rɔba injɛkshɔn moldin prɔses de yuz wan stet-ɔf-di-at hopa ɛn ɔt barɛl sistɛm. Dis we aw dɛn de du tin kin fayn fɔ fid di rɔba we nɔ dɔn mɛn fayn fayn wan, dɔn i kin push am tru wan plɔnja insay wan chɛmba we dɛn dɔn ɔt, ɛn mek shɔ se di mold ful-ɔp wit mɔld. Wi prɔses na fɔ sɔpɔt bɔku bɔku duromita ɛn kɔstɔm shep dɛn, wit ɛmpɛshmɛnt fɔ ridyus flash ɛn mek shɔ se di saykl tɛm dɛn kwik kwik wan.
 
  • Ha-volyum ɛn low-volume kapabiliti: Wi gɛt ɔl tu di ay ɛn lɔw-volyum prodakshɔn, we de adap wi tɛknik fɔ fit yu nid dɛn.
  • Sofistikeyt pat layn dɛn: Wi ɛkspɛriɛns fɔ sɛt pat layn dɛn kin mek flash dɛn nɔ bɔku pan di pat dɛn we dɛn dɔn mol rɔba, fɔ mek shɔ se dɛn dɔn fɔ finish wan ay kwaliti.
  • Tempracha Manejmɛnt: Wi rili kɔntrol di moldin tɛmpracha fɔ balans flɔ, kwaliti, ɛn trɛnk fɔ di fayn prodak.
     
rɔba
rɔba-

Rɔba kɔmpreshɔn moldin savis .

Dɛn no am as wan pan di we dɛn we nɔ de tek bɔku mɔni ɛn we dɛn kin yuz bɔku bɔku wan, kɔmpreshɔn moldin na fayn tin fɔ lɔw to midul prodakshɔn volyum. dis prכsεs involv fכ prε-hεt di rכba mεtirial εn kכmprεs am insay di mכld kכva yuz wan ay-prεshכn prεs. I patikyula advantej fɔ prodyuz big, bɔku bɔku prɔdak dɛn lɛk gasket, sil, ɛn O-ring.
 
  • Mold Construction: Wi de disayn wan tu-plet mold, we dɛn kin adap fɔ klos ɛn opin strɔkchɔ dɛn.
  • Material Placement: Dɛn kin put di moldin matirial, we dɛn miks wit wan mɛrɛsin we de mɛn, insay di kaviti we gɛt ɔt.
  • Mold kɔmpreshɔn: Dɛn kɔmprɛs di matirial, ɛn mek shɔ se dɛn gɛt ful kɔntakt wit ɔl di mold eria dɛn.
  • Itin ɛn mɛn: Dɛn kin ɔt di mol fɔ mɛn di rɔba fayn fayn wan.
  • Faynal prɔsesin: Afta wi dɔn mol, wi de pul ɔvaflɔ ɛn pripia di prɔdak fɔ deliv.
     
Start yu projɛkt dɛn tide .
Get in touch
Selekt Fayl dɛn - 20MB Maks Fayl Sayz .

Wetin na rɔba moldin) .

Rɔba moldin de shep rɔba insay difrɛn prɔdak dɛn. I de yuz ɔt ɛn prɛshɔn insay wan mol. Dis we ya kin kwik ɛn i kin sev di kɔst. I de mek bak pat dɛn we kɔrɛkt ɛn strɔng. Di prɔses inklud tri kayn dɛn: injɛkshɔn, kɔmpreshɔn, ɛn transfa moldin. Ɛni kayn gɛt in yon yus ɛn bɛnifit dɛn. Dis kin mek rɔba mold impɔtant fɔ mek difrɛn tin dɛn we dɛn kin yuz fɔ rɔb.
 

Molding we dɛn kin yuz fɔ mek rɔba injɛkshɔn .

Advantej dɛn fɔ rɔb injɛkshɔn moldin .

- Superior Precision: Ideal fɔ intrɛstin dizayn dɛn we nid ɛksaktɔl dimɛnshɔn.
- Efishin prodakshɔn: I fayn fɔ mek dɛn mek ay-volyum, fɔ gi kɔnsistɛns.
- Minimal west: de prodyuz less skrap matirial, enhans kost-effektiv.

Disadvantages of raba injekshɔn moldin .

- Limitɛd matirial kɔmpitibliti: I bɛtɛ fɔ silikon rɔba mol ɛn ɔda tin dɛn we tan lɛk am.
- Ay initial kɔst: invɛstmɛnt na spɛshal mashin kin bi sɔbstanshal.

 

 

 

Robber kompression moldin .

Advantej dɛn fɔ kɔmpreshɔn moldin .

- Versatility: Adaptable fɔ difrɛn matirial dɛn, inklud blak rɔba moldin.
- Kɔst-ɛfɛktiv: lɔwa tul kɔst, mek i fayn fɔ kɔstɔm rɔba moldin prɔjɛkt dɛn.
- Simplified process: I izi fɔ manej ɛn mentein, mɔ fɔ fleksibul rɔba moldin.

Disadvantej fɔ kɔmpreshɔn moldin .

- Limited komplexiti: Not ideal fo ekstrim ditel o thin-walled dizain.
- Lכng saykl tεm: kin nכ fayn fכ big-big prodakshכn dimand.

 

Molding we dɛn kin yuz fɔ transfa rɔba .

Advantej dɛn fɔ rɔba transfa moldin .

- Customization: Ekselentli suited fɔ kwalifɔm rɔba moldin, alaw fɔ yunik pat dizayn.
- Ay-kwaliti finish: de prodyuz pat dɛn wit smol smol sɔfays ɛn prɛsis ditil dɛn.
- Gud fɔ smɔl pat dɛn: Ideal fɔ mek smɔl, intrikɛt kɔmpɔnɛnt dɛn.

Disadvantej fɔ rɔba transfa moldin .

- Inkris west: kin mek mɔ matirial west kɔmpia to injɛkshɔn moldin.
- Kɔmpleks tul: nid fɔ gɛt intrikɛt mold dizayn, we kin mek di prodakshɔn kɔst go ɔp.
 

Rubber molding kapabiliti na Team MFG .

Rikwest fɔ wan kot .

Di bɛnifit dɛn we pɔsin kin gɛt frɔm rɔba moldin .

rɔba-

Ɔganayz

I de pul bɔku pan di wokman dɛn, sev tɛm ɛn kɔst, ɛn ad mashin-driven kɔnsistɛns.
 
 
 
 
rɔba--

Fas fas

mashin-driven prɔsesin fɔ . 
Raw matirial de lid to fasta prodakshɔn tɛm.
 
 
 
 
rɔba---

Kost-ɛfɛktiv .

Injɛkshɔn moldin na ikɔnomik, mɔ fɔ ay volyum dɛn fɔ midul to ay kɔmplisiti prɔdak dɛn.
 
 
 
rɔba

Advantej dɛn fɔ kɔmpreshɔn ɛn transfa moldin .

I fayn fɔ spɛshal pat dizayn, we de gi lɔwa apfrɔnt kɔst, smɔl matirial batch, ɛn versatility insay molding.

Wetin mek wi rɔba moldin savis .

1
Prɔfɛshɔnal Ɛnjinia Tim
Wi Injinia dɛn, Projɛkt Maneja dɛn gɛt ɛkspiriɛns wit Eshia ɛn Wɛstɛn biznɛs kɔlchɔ, wi gɛt sɔlid injinɛri bakgrɔn ɛn ɛp bɔku kɔstɔma dɛn frɔm ɔlsay na di wɔl fɔ lanch prɔdak fɔ makɛt saksesful ɛn kwik.
2
Fast delivri saykl
Akɔdin to difrɛn strɔkchɔ dɛn, 1,000 simpul pat dɛn na smɔl lɛk 4 dez.
3
Ha-kwaliti rɔba prodakt dɛn
sistamɛtik kwaliti manejmɛnt fɔ mek shɔ se dɛn gɛt ay kwaliti prɔdak dɛn (FQC, IQC, IPQC, OQC, QE).
4
Mit di kɔstɔma in kwantiti rikwaymɛn dɛn
ilɛksɛf di kwantiti na di kwantiti, i kin mit di kɔstɔma in rikwaymɛnt dɛn.
Rɔba1 .

Di tin dɛn we dɛn kin yuz fɔ mek rɔba .

 
TPE、TPU、TPV、TPR, - Silikon
- Epdm
- urethane
- polyurethane (PU)
- polytetrafluoroethylene (PTFE)
- ay-density polietilen (hdpe)
 

Frɔm rapid protɔtayp to big volyum manufakchurin .

  • Rapid protɔtayp dɛn .
  • Low & midul volyum prodakshɔn .
  • Mass prodakshɔn .

Tailored Solutions fɔ difrɛn difrɛn industri dɛn .

Na Team MFG, wi ɔndastand se ɛni industri gɛt spɛshal dimand ɛn chalenj dɛn. Wi kɔstɔm rɔba moldin savis dɛn de fɔ mit di patikyula nid dɛn fɔ difrɛn sɛktɔ dɛn, lɛk ɔtomotiv, ɛrospɛs, wɛlbɔdi biznɛs, ɛn kɔshɔma prɔdak dɛn. Wi de wok klos wit wi klaynt dɛm fɔ divɛlɔp rɔba pat dɛm we nɔ jɔs de wok bɔt dɛn de ɛp bak fɔ mek dɛn prɔdak dɛm gɛt ɔl di sakrifays.
 

Galeriya fɔ di pat dɛn we dɛn mek wit rɔba fɔ mek dɛn gɛt rɔba .

Yu de luk fɔ onlayn rɔba moldin savis dɛn?

 

Faqs pan rɔba moldin bay tim mfg

  • Yu kin gi kɔstɔm sɔlvishɔn fɔ yunik rɔba mold nid dɛn?

    Yes, na Team MFG, wi spɛshal fɔ mek kɔstɔm sɔlvishɔn dɛn we dɛn mek fɔ di spɛshal tin dɛn we wi klaynt dɛn nid, fɔ mek shɔ se dɛn satisfay insay ɛvri prɔjek .

  • Wetin mek rɔba injɛkshɔn moldin efishɔnal?

    Rɔba injɛkshɔn moldin na efishɔnal bikɔs ɔf in abiliti fɔ prodyuz ay volyum wit minimal west, kɔnsistɛns kwaliti, ɛn ridyus prodakshɔn tɛm.

  • Aw silikon mold rɔba de bɛnifit mi prɔjek?

    Silikon mold rɔba de gi ɛksepshɔnal fleksibiliti ɛn ɔt rɛsistɛns, we fayn fɔ prɔdak dɛn we fɔ bia wit di kɔndishɔn dɛn we rili bad ɛn we dɛn de kip dɛn shep ɛn di we aw dɛn de wok.

  • Wetin mek yu fɔ pik EPDM rɔba fɔ mol?

    Dɛn kin pik EPDM Rɔba fɔ di fayn fayn tin dɛn we i kin du fɔ mek i nɔ ebul fɔ fɛt di wɛda, di UV rayt, ɛn di we aw di tɛmpracha kin chenj, ɛn dis kin mek i fayn fɔ mek dɛn yuz am na do ɛn fɔ mek i gɛt ay strɛs.

  • Wetin na di advantej fɔ kɔstɔm rɔba mol?

    Kastom rɔba moldin de alaw fɔ prɛsis tayla fɔ rɔba pat dɛn to spɛshal dimɛnshɔn ɛn prɔpati dɛn, fɔ mek shɔ se dɛn fit fayn fayn wan fɔ di aplikeshɔn we dɛn want.

Team MFG na wan rapid manufakchurin kompini we spɛshal pan ODM ɛn OEM bigin insay 2015.

Kwik link .

Tel we de na di wɔl.

+86-0760-88508730 Di wan dɛn we de stɔdi bɔt di Baybul.

Fon

+86-15625312373

Imel .

ericchen19872017@gmail.com .
Kopirayt    2025 Team Rapid Mfg Co., Ltd. Ɔl di rayt dɛn de fɔ yuz. Prayvesi Polisi .