Fastɛns na impɔtant mɛkanikal tul dɛn we de kɔnɛkt ɔ afiks tu ɔ mɔ sɔfays togɛda. Ilɛksɛf na motoka asɛmbli, os rɛnovashɔn, ɔ ilɛktroniks, fastɛns dɛn nid fɔ ol kɔmpɔnɛnt dɛn insay, ɔ fɔ sɔm tɛm ɔ fɔ ɔltɛm. Wit difrɛn kayn dɛn, dizayn dɛn, ɛn matirial dɛn we de, dɛn de kia fɔ difrɛn aplikeshɔn dɛn akɔdin to di industri dɛn, we mek dɛn sɛlɛkshɔn bi impɔtant disizhɔn fɔ mek shɔ se i go te, i sef, ɛn i go wok fayn.
Insay dis atikul, wi go ɛp yu fɔ dig insay difrɛn kayn fastana dɛn, analayz dɛn kayn dɛn, aplikeshɔn dɛn, matirial dɛn ɛn ɔda tin dɛn, de lguid yu fɔ pik di fastɛns we fit yu pas ɔl.
Tayp dɛn fɔ di fastɛns dɛn .
Di fastɛns dɛn we nɔ de pe fɔ di tin dɛn we dɛn dɔn yuz fɔ mek dɛn wok fayn fayn wan .
Dɛn kin pul di fastɛns dɛn we nɔ de fɔ ɔltɛm, we dɛn kin pul izi wan we dɛn nɔ pwɛl di tin dɛn we dɛn jɔyn, we kin alaw fɔ disassembly ɛn ri-assembly as nid de.
1. Skru dɛn .
Skru na sɔm pan di fastɛns dɛn we dɛn kin yuz fɔ du bɔku tin dɛn, we gɛt wan shaft we gɛt trɛd we de gi pawa we go de fɔ lɔng tɛm. Dɛn ed tayp ɛn tips kin difrɛn bay di matirial dɛn we dɛn want fɔ. Fɔ no mɔ bɔt skru ɛn dɛn aplikeshɔn dɛn, chɛk wi gayd pan Tayps of fasteners fɔ injɛkshɔn moldin ..
Wud skru dɛn
we dɛn mek fɔ wok wit wud, dɛn skru dɛn ya gɛt kɔs kɔs trɛd ɛn wan taped ed fɔ mek dɛn grip dɛn fayn fayn wan insay wud.
Draywal skru dɛn
sɛlf-tap skru dɛn wit shap trɛd dɛn, we fayn fɔ mek dɛn sikyurɛt draywal we nɔ go mek dɛn pwɛl.
Sheet metal skru
ful thread shanks en shap poin mek dis skru dem perfekt fo join metal komponent dem.
Mashin skru dɛn
we dɛn kin yuz na mashin, dɛn kin put dɛn skru dɛn ya insay ol dɛn we dɛn dɔn drɔ bifo tɛm fɔ mek dɛn fasten mɛtal pat dɛn fayn fayn wan.
Masonri skru dɛn
strɔng thread skru dɛn we dɛn mek fɔ go insay taf say dɛn lɛk kɔnkrit ɛn brik.
Bod skru dɛn
shap-tip skru dɛn we fayn fɔ matirial dɛn lɛk MDF, fɔ mek shɔ se i izi fɔ instɔl ɛn fɔ ol fayn fayn wan.
Ekstirian skru dɛn
we dɛn kɔt fɔ mek dɛn nɔ rɔst ɛn kɔrɛshɔn, dɛn skru dɛn ya fayn fɔ yuz na do lɛk dɛk ɛn fɛns.
2. Bolt dɛn .
Bolt dɛn na threaded fasteners we dɛn mek fɔ wok wit nɛt. Dɛn kin yuz dɛn bɔku bɔku wan na aplikeshɔn usay dɛn nid fɔ gɛt mɔ trɛnk. Dis dɔŋ ya na sɔm kɔmɔn bolt tayp dɛn. Lan mɔ bɔt dis . Di difrɛns bitwin nɛt ɛn bolt dɛn na wi kɔmprɛhɛnsif gayd.
Ankɔr bolt dɛn
we dɛn yuz fɔ kɔnɛkt strɔkchɔral kɔmpɔnɛnt dɛn to kɔnkrit, dɛn bolt ya de gi impɔtant stebiliti insay kɔnstrɔkshɔn prɔjɛkt dɛn.
Arbor bolts
we dɛn mek wit rivas trɛdin, arbor bolt dɛn pafɛkt fɔ sikyurɛt miter saw bled dɛn sikrit wan insay ples.
Carriage bolts
we gɛt wan smol, rawnd ed ɛn skwea nɛk, dɛn bolt ya de mek dɛn nɔ spin we dɛn de instɔl, we fayn fɔ mek wud wok.
Wil bolt dɛn
we impɔtant fɔ mek motoka sef, dɛn bil wil bolt fɔ handel ay tɔk ɛn sikyu wil fayn fayn wan.
Ɛlifant bolt dɛn
we gɛt big flat ed, dɛn kin yuz dɛn bolt dɛn ya na kɔnvaysɔ sistem fɔ gi sikyɔriti, stebul kɔnɛkshɔn.
heks ed bolt
wan versatile, komon bolt taip wit siks-said ed, we de ofa ekselent grip fo wrench taytnin.
Dabl ɛnd bolt dɛn
we dɛn thread pan ɔl tu di ɛnd dɛn, dɛn bolt ya pafɛkt fɔ flush instɔleshɔn usay dɛn nid fɔ fastɛns we nɔ gɛt ed.
Ay bolt dɛn
we gɛt wan lɔp na wan ɛnd, dɛn kin yuz ay bolt fɔ ataya rop ɔ kebul, we kin gi yu ankɔrin we yu kin abop pan.
U-shape bolts
we dɛn mek fɔ mek dɛn gɛt paip ɔ silinda tin dɛn, U-shaped bolt dɛn de alaw fɔ mek i izi fɔ instɔl ɛn strɔng sɔpɔt.
3. Nat dɛn .
Nat dɛn kin pe wit bolt fɔ fasten tin dɛn togɛda fayn fayn wan. Dɛn kin gɛt difrɛn shep ɛn saiz fɔ akɔmod difrɛn aplikeshɔn dɛn.
Cap nuts
dome-shaped nuts we de kɔba ɛn protɛkt di ɛnd dɛn we de na do fɔ bolt dɛn, we de gi klin, dɔn we dɔn.
Kastɛl nat dɛn
we dɛn kɔl dɛn notched top, kast nat dɛn de yuz wit kɔta pin fɔ mek di bolt nɔ lɔs.
Weld nuts
permanently welded to surfaces, dɛn nat ya de gi sikyuɔr fastɛns na say dɛn we at fɔ rich, we dɛn kin yuz mɔ na industrial aplikeshɔn dɛn.
hex nuts
Di kayn nat we dɛn kin yuz mɔ, heks nat simpul fɔ fast wit standad wrench ɛn fɔ gi yu trɛnk we yu kin abop pan.
Naylon lɔk nat dɛn
we gɛt naylon insɛt, dɛn nɛt ya nɔ de mek di vaybreshɔn ɔ tɔk nɔ kɔmɔt fayn, ɛn dis kin mek dɛn fayn fɔ di dinamik ɛnvayrɔmɛnt dɛn.
Flange nuts
we dɛn mek wit wan wayd flɛnch, dɛn nat ya de sheb lod dɛn ivin ɛn gi ɛkstra grip, we de ridyus di nid fɔ was.
4. Washa dɛn .
Washers de sav fɔ sheb lod, ridyus frikshɔn, ɔ mek i nɔ lik na fastɛns asɛmbli. Fɔ no mɔ bɔt di kayn ɛn aplikeshɔn dɛn fɔ was, si wi Kɔmprɛhɛnsif analisis fɔ di kayn wash dɛn ..
Plɛn washers
Basic ɛn versatil, plain washers de inkrisayz sɔfays eria ɔnda wan fastɛns, ɛp fɔ sheb lod ivin fɔ mek dɛn nɔ pwɛl.
Spring washer dɛn
we dɛn mek fɔ gi tɛnsiɔn, spring washer dɛn kin mentɛn wan sikyuɔr hold pan fastɛns, mɔ na envayrɔmɛnt dɛn we kin vaybrɛshɔn ɔltɛm.
Lok washer
lok washers de mek fasteners nɔ lus ova tɛm, we de gi wan ad layt fɔ sikyɔriti fɔ krichɔl kɔnɛkshɔn.
5. Di ed dɛn .
Flat skru ed dɛn
we dɛn mek fɔ sidɔm flush wit di surface, flat skru ed dɛn gɛt kɔntasɔnk shep fɔ wan simlɛs finish. Dɛn fayn fɔ mek di say dɛn we de na di say we dɛn de, nɔ mek dɛn nɔ kɔmɔt na do ɛn mek klin, pɔshɔnal apia.
Hex Washer Heads
we inkorporet wan bilt-in washer, hex washer eds de enhans lod distribushɔn ɛn mek shɔ se wan sikrit kɔnɛkshɔn. Dis dizayn de gi ad stebiliti ɛn ridyus di risk fɔ matirial damej.
Rays skru ed dɛn
we gɛt wan dom ɔ oval shep, rayz skru ed dɛn de gi wan mɔ prominɛnt apinans pas flat ed dɛn, we de mek dɛn fayn fɔ visible fastenings usay aesthetics impɔtant.
Bugle skru ed dɛn
we dɛn kɔl wan kɔba shep dɔŋ di ed, Bugle skru ed dɛn de mek di sɔfa nɔ pwɛl di say we dɛn de we dɛn de instɔl am. We dɛn kin yuz am na draywal, dɛn kin ridyus di matirial split ɛn mek shɔ se dɛn dɔn fɔ finish wan fayn fayn wan.
Domed skru ed
wit wan rawnd surface, Domed skru eds ofa wan big eria fɔ mek i nɔ tɔn, we de gi ɔl tu wan finish luk ɛn ad sikyɔriti agens fɔ lus.
Truss skru ed dɛn
wayd ɛn lɔw-prɔfayl, trɔs skru ed dɛn gɛt bɔku bɔku sɔfayz eria, we de mek grip ɛn stebul, mɔ na aplikeshɔn dɛn we nid big sɔfays kɔntakt.
binding skru ed
tik pas pan ed, binding skru ed dɛn gɛt dip slot ɛn bɛtɛ bia sɔfays. Dis dizayn de ɛp fɔ mek di trɛnk strɔng ɛn i de gi mɔ sɔfayz eria fɔ wan sikyɔriti hold.
Flange skru ed
flange skru ed inklud wan intagreted washer, mek shɔ se ivin prɛshɔn distribyushɔn akɔs di matirial. Dis kin mek dɛn ebul fɔ ol di lod fayn fayn wan ɛn dɛn kin ridyus di strɛs we de na di say we dɛn de.
Pan skru ed
wit smɔl rawnd ɔp ɛn shɔt vertikal sayd, pan skru ed dɛn de gi wan lɔw-prɔfayl, rawnd finish. Dɛn de gi ɔl tu di aesthetic apil ɛn stebiliti, we dɛn kin yuz mɔ na aplikeshɔn dɛn we nid fɔ luk klin, nɔ de mek pipul dɛn no bɔt am.
6.Drayva dɛn .
slotted
a tradishonal flat-hed draiva, di slotted dizain na simpul bot prone to slipping bikos of in single slot. I bεst yus in aplikεshכn usay minimal tכk nid.
Phillips
we gɛt wan krɔs-shep dizayn, Phillips drayva dɛn de gi bɛtɛ grip ɛn dɛn de yuz dɛn bɔku bɔku wan na ɛvride aplikeshɔn dɛn. Dɛn de gi mɔ stebiliti pas slotted drayva bɔt dɛn kin stil kam aut ɔnda ebi tork.
Pozi
we fiba Phillips bɔt wit ɔda grooves, Pozi drayva dɛn alaw fɔ big tork we nɔ slip, we mek dɛn fayn fɔ aplikeshɔn dɛn we nid ɛkstra taytin fɔs.
Torx
wit wan sta-shaped dizayn, Torx drayva dɛn minimiz strip ɛn dɛn ebul fɔ handle ay tork. Dɛn pɔpul na ɔtomotiv ɛn ilɛktronik aplikeshɔn usay durabiliti impɔtant.
Heksagonal
heksagonal drayva dɛn de gi wan big kɔntakt sɔfays, we de mek dɛn fayn fɔ mɛkanikal aplikeshɔn dɛn. Dɛn shep de alaw fɔ signifyant tɔk we nɔ gɛt risk fɔ slip.
Square recessed
Dis drayva tayp de gi yu wan grip we rili sikrit, we de ridyus di chans fɔ slip. Bɔku tɛm dɛn kin yuz am fɔ wok wit wud ɛn fɔ bil fɔ mek dɛn ebul fɔ fasten dɛn we dɛn kin abop pan.
Wan-we
we dɛn mek fɔ tayt nɔmɔ, wan-we drayva dɛn fayn fɔ yuz fɔ mek dɛn nɔ yuz tampa, fɔ mek dɛn nɔ pul di tin dɛn we dɛn dɔn mek wans dɛn dɔn instɔl dɛn.
Fastɛns dɛn we go de sote go .
Dɛn mek fastɛns dɛn we go de sote go fɔ mek dɛn go de na ples fɔ lɔng tɛm. Dɛn fastɛns dɛn ya kin mek strɔng, dɛn jɔyn dɛn we kin de fɔ lɔng tɛm ɛn bɔku tɛm dɛn nɔ kin want fɔ disassembly.
1. Nail dɛn .
Nel na wan pan di ol ɛn simpul kayn fastɛns dɛn, we dɛn kin yuz bɔku bɔku wan fɔ wok wit wud ɛn fɔ bil.
Kɔmɔn nel dɛn
wit tik shaft, kɔmɔn nel dɛn pafɛkt fɔ strɔkchɔral aplikeshɔn usay trɛnk ɛn durabiliti impɔtant, we de mek dɛn fayn fɔ fram ɛn ebi-diuti kɔnstrɔkshɔn.
Bɔks nel dɛn
we tan pas kɔmɔn nel dɛn, dɛn mek bɔks nel dɛn fɔ layt wud strɔkchɔ dɛn lɛk kret ɛn bɔks dɛn. Dɛn slimmer profayl de ridyus di risk fɔ split dilik wud.
Brad nel dɛn
we smɔl wit tin ed, Brad nel dɛn kin nia fɔ mek dɛn nɔ si dɛn wans dɛn dɔn drɛb dɛn insay wud, we kin mek dɛn fayn fɔ dilik trim ɛn ditayla wud wok prɔjek dɛn.
Fɔ dɔn di nel dɛn
we big pas Brad nel dɛn, dɛn kin yuz di nel dɛn fɔ mek dɛn gɛt mɔt ɛn trim insay, ɛn dis kin mek dɛn ol dɛn fayn fayn wan ɛn dɛn kin lɛf wan smɔl ol we izi fɔ kɔba.
Kɔt nel dɛn
skwea-shep kɔt nel dɛn nɔ gri fɔ bɛn ɛn mek wud nɔ split, we mek dɛn fayn fɔ di istri ristɔrɔshɔn prɔjek dɛn ɛn tradishɔnal kapɛnta wok.
Draywal nel dɛn
we dɛn mek spɛshal fɔ instɔl draywal, dɛn nel dɛn ya de gi wan strɔng grip fɔ mek dɛn sikyurɛt draywal to wud framing we nɔ go pwɛl di matirial.
Flooring nels
hevi-duti wit spiral shaft, dɛn kin yuz flooring nel fɔ tay fayn fayn wan di floorboards, we kin mek i nɔ go te ɛn i kin mek i nɔ lɔs ova tɛm.
Kɔnkriyt nel dɛn
we dɛn dɔn at fɔ mek dɛn taf, dɛn mek kɔnkrit nel dɛn fɔ go insay kɔnkrit ɔ masonri, we de gi sikrit ol na dense, rigid surfaces.
Ruf nel dɛn
wayd-hed fɔ mek dɛn nɔ lik, dɛn kin yuz ruf nel fɔ fasten ruf matirial, fɔ gi wɛda rɛsistɛns ɛn fɔ de fɔ lɔng tɛm na ɛkstirian aplikeshɔn dɛn.
2. Rivet dɛn .
Rivet dɛn kin yuz mɔ fɔ bil, avieshɔn, ɛn ɔtomotiv industri usay dɛn nid fɔ gɛt pɔrmanent, we go de fɔ lɔng tɛm. Lan mɔ bɔt dis . Rivets ɛn dɛn aplikeshɔn dɛn na wi ditayl gayd.
Solid rivets
solid rivets na simpul bɔt dɛn rili wok, bɔku tɛm dɛn kin yuz am na aplikeshɔn usay trɛnk ɛn sef impɔtant, lɛk insay strɔkchɔral ɔ aerospace projɛkt dɛn.
Tubular rivets
we fiba di solid rivets, tubular rivets de izi fɔ instɔl ɛn dɛn kin yuz am fɔ layt matirial usay dɛn nid fɔ gɛt strɔng bɔt less pɔrmanent kɔnɛkshɔn.
Blaynd rivet dɛn
we dɛn mek fɔ sityueshɔn dɛn usay akses to ɔl tu di say dɛn na di jɔyn nɔ bɔku, blaynd rivet dɛn fayn fɔ kwik, rili fastɛns na eria dɛn lɛk shit mɛtal asɛmbli.
Drayv rivet dɛn
we dɛn dɔn instɔl wit hama, drayv rivet dɛn kin yusful na say dɛn we at fɔ rich usay tradishɔnal fastɛns we dɛn kin yuz nɔ kin wok.
Split rivet dɛn
we gɛt leg dɛn we de skata we dɛn de instɔl, split rivet dɛn de gi wan sikrit hold, we de mek dɛn pafɛkt fɔ fasten sɔft ɔ brital matirial dɛn lɛk lɛda ɔ plastic.
3. Ankɔ dɛn .
Ankɔ dɛn de gi sɔpɔt bay we dɛn de ɛmbas dɛnsɛf insay di matirial, we de mek wan sikrit bond.
Mekanikal ankɔ dɛn
we dɛn dɔn instɔl insay ol dɛn we dɛn dɔn drɔ bifo tɛm, mɛkanikal ankɔ dɛn de ɛkspɛn fɔ grip di matirial we de rawnd, we de gi strɔng, rili fastɛn. Dɛn kin yuz dɛn na kɔnkrit ɛn masonri fɔ midul-duti aplikeshɔn usay lod-bearing impɔtant.
Kεmikכl ankכr
dεn ankכr dεm de dip pan adhesives fכ bond to di sabstεrayt, we de mek dεm fayn fכ hכy-strεs aplikεshכn dεm. Kεmikכl ankכr dεm na perfekt fכ sikyuכr hεvi lod, εspεshali insay kכnkri, usay dεn nid fכ strכng εkstrim εn tεm we go de te.
4. Insayt dɛn .
Insɛt dɛn de gi intanɛnt trɛdin insay matirial dɛn we tu saf ɔ we dɔn pwɛl fɔ dairekt thredin. Fɔ no mɔ bɔt Inserts in Injection Molding, chɛk wi gayd pan Disain gaydlain fɔ optimal threaded pat dɛn na injɛkshɔn moldin ..
Ekstanshal thread insay
Dɛn silindrikal bush dɛn ya gɛt ɔl tu di intanɛnt ɛn ɛksternal trɛd dɛn, we de mek nyu trɛd dɛn as dɛn de drɛb dɛn insay di matirial. Dis sɛlf-tap dizayn de gi wan sikrit fit akɔdin to difrɛn matirial dɛn, we fayn fɔ mek di trɛd trɛnk bɛtɛ na di tin dɛn we soft.
Intεrεnt trεd insεt dεm
we dεn dεsign wit intanal trεd dεm, dεn insεt dεm ya de εkspεnd εgεst di wכl dεm na wan prε-dril ol wans dεn insεt am. Di ekspanshɔn de mek shɔ se wan tayt ɛn stebul grip, we de gi rilibul fastɛns na aplikeshɔn usay stebiliti na ki.
Ki Lɔk Insɛt dɛn
we de kɔba intanɛnt ɛn ɛksternal trɛdin wit lɔk vertikal ki, ki lɔk insɛt dɛn de gi ad trɛnk to wik matirial dɛn. Dis mɛkanikal lɔk na pafɛkt fɔ ay-stress ɔ hevi-lod aplikeshɔn, we de sikyurɛt di insɛt fayn fayn wan insay ples.
Pres-in insɛt dɛn
we dɛn kin yuz fɔ mek had plastic, dɛn kin instɔl dɛn insɛt dɛn ya bay we dɛn de yuz ɔltrasɔnik sawnd wev dɛn, we kin mɛlt ɛn bon di insay to di plastic. Di rizulyt na wan strɔng, durable kɔnɛkshɔn we de agens fɔ lus ova tɛm.
Hɛlikal skru insɛt dɛn
we dɛn mek wit kɔyl waya, dɛn kin yuz ɛliks skru insay fɔ mek di trɛd dɛn we dɔn pwɛl, kam bak ɔ mek dɛn strɔng bak. Dɛn de gi wan sɔlv we go de fɔ lɔng tɛm fɔ mek dɛn ripɛnt di trɛd, ɛn mek shɔ se dɛn gɛt strɔng kɔnɛkshɔn insay ɔl tu di nyu ɛn di trɛd dɛn we dɔn de.
Blaynd threaded stud inserts
we gɛt wan knurled bɔdi ɛn wan projɛkt threaded stud, dɛn insɛt ya de instɔl insay prɛ-dril ol dɛn. We dɛn dɔn tayt am, di bak pat pan di insɛt de pan fɔ mek i sef, we mek i fayn fɔ aplikeshɔn usay akses to di bak say nɔ bɔku.
Dizayn ficha dɛn fɔ fastɛns dɛn .
Fasteners kam wit wan renj ɔf dizayn ficha dɛn we de dikte dɛn aplikeshɔn ɛn pefɔmɛns. Dɛn tin ya na di kayn ed, di trɛd, di pɔynt dɛn, ɛn di drayv stayl dɛn, fɔ mek shɔ se dɛn fit fɔ ɛni wok fayn fayn wan. Fɔ no mɔ bɔt Fastener Design in Specific Applications, chɛk wi gayd pan Disain fɔ day kastin ..
Skru ɛn bolt ficha dɛn .
Di kayn ed dɛn : I gɛt flat, heks, ɛn rawnd ed, we de afɛkt aw di fastɛn sidɔm na di matirial. Lan mɔ bɔt dis . Difrɛn kayn skru ed dɛn na wi kɔmprɛhɛnsif gayd.
Threod Types : Kɔs trɛd fɔ mek dɛn ebul fɔ gɛda dɛn kwik kwik wan; Fayn trɛd fɔ inkris tɛnsiɔn. Fɔ no mɔ bɔt di kayn trɛd dɛn, si wi atikul bɔt Ɔndastand di kayn trɛd ɛn di jɔyometrik paramita dɛn ..
Points and Tips : Dril-point tips fɔ penetrating had matirial, blunt tips fɔ wud fɔ mek yu nɔ split.
Shank Designs : Ful-thread shanks fɔ big hold, pat-threaded fɔ mɔ fleksibiliti.
Nail dizayn ficha dɛn .
Sayz ɛn gej dɛn : Nel dɛn kin lɔng ɛn tik kin difrɛn difrɛn wan bay di aplikeshɔn.
Head Designs : Sɔm ed dɛn de flush wit di matirial, ɔda wan dɛn de rayz fɔ mek i izi fɔ pul.
Point types : Blunt tips Ridyus wud split, shap tips fɔ efishɔnal penetreshɔn.
Shank Features : Spiral ɔ ringed shanks de gi bɛtɛ grip insay sɔft matirial.
Di we dɛn fɔ mek di tin dɛn we dɛn de mek .
Fastɛns dɛn de prodyuz yuz sɔm ki manufakchurin prɔses, ɛni wan we dɛn pik bay di matirial ɛn aplikeshɔn nid.
Machining : Na prɛsis bɔt slo we dɛn kin yuz fɔ prodyuz smɔl kwantiti wit ay tolɛreshɔn. Lan mɔ bɔt dis . CNC prɛsishɔn mashinin insay wi ditayl gayd.
Kol fɔm : Efisiɛns shep mɛtal na rum tɛmpracha, kip di matirial in trɛnk we i de minimiz west. Dis prɔses tan lɛk sɔm tɛknik dɛn we dɛn yuz insay . PRESƐS DIE KƆST ..
Hot Forging : Dɛn kin shep di mɛtal dɛn we dɛn dɔn ɔt insay fastɛns, we de gi ɛnhans daktiliti ɛn trɛnk. Fɔ no mɔ bɔt aw fɔ prosɛs mɛtal, luk wi atikul bɔt 17-4 PH stenlɛs stiɛl prɔsesin gaydlayn dɛn ..
Stamping : Dɛn kin yuz am fɔ mek mɛtal was ɛn ɔda flat pat dɛn bay we dɛn de kɔt ɛn shep mɛtal sheet dɛn. Dis prɔses tan lɛk sɔm tɛknik dɛn we dɛn yuz insay . Sheet Metal Prototyping we dɛn mek wit ..
Fɔ no mɔ bɔt di we aw dɛn de mek tin dɛn, mɔ fɔ smɔl smɔl tin dɛn we dɛn de mek, yu go si wi atikul bɔt Di we dɛn we dɛn kin yuz fɔ mek di volyum nɔ bɔku kin ɛp.
Matirial dɛn we dɛn yuz na Fastener Prodakshɔn
Dɛn kin pik difrɛn matirial dɛn fɔ mek dɛn ebul fɔ mek fastɛns bay we dɛn yuz di trɛnk we dɛn nid, di we aw dɛn nɔ gri fɔ tek di tin dɛn we dɛn nid, ɛn di tin dɛn we dɛn de yuz fɔ mek di envayrɔmɛnt nɔ bɔku. Fɔ wan ɔvaviu fɔ difrɛn kayn mɛtal dɛn ɛn dɛn prɔpati dɛn, chɛk wi gayd pan Difrɛn kayn mɛtal dɛn ..
| Matirial | Diskripshɔn . |
| Ayɛn | di mכst kכmכn mεtirial fכ fastεn, we de na gred fכ difrεn strכng dεm (gεdi 2, 5, 8). 4140 vs 4130 stɛl . |
| Stenlɛs stiɛl . | Ofa ekselent koroshon resistans, ideal fo outdoor en marin envairoment. 17-4 PH stenlɛs stiɛl prɔsesin gaydlayn dɛn . |
| Aluminium na di . | Layt ɛn resistant to kɔrɛshɔn, we dɛn yuz fɔ ɔtomotiv ɛn aerospace aplikeshɔn. Aluminium 6061 vs 7075 |
| Brass na di . | Aesthetic ɛn corosion-resistant, we dɛn kin yuz na ilɛktrik ɛn dɛkɔretiv aplikeshɔn dɛn. Kɔpa vs brɔnz . |
| Bronz we dɛn mek wit brɔnz . | Strɔng ɛn kɔrɛshɔn-rɛsistɛns, fayn fɔ harsh ɛnvayrɔmɛnt ɛn nɔ-pɛrmanɛnt fastɛns. |
Fɔ pik di rayt fastɛns .
We yu de pik di rayt fastɛns, tink bɔt dɛn tin ya:
Aplikeshɔn Fit : Di fastɛns fɔ mach di matirial ɛn strɛs lɛvɛl dɛn na di aplikeshɔn.
Thread Selection : Kɔs trɛd fɔ mek yu ebul fɔ gɛda kwik kwik wan; Fayn trɛd fɔ big tɛnsiɔn.
Material Compatibility : Pik di matirial dɛn we kin ebul fɔ bia wit di envayrɔmɛnt kɔndishɔn (ɛgz., kɔrɛshɔn, tɛmpracha).
Di tin dɛn we de apin na di envayrɔmɛnt : Tink bɔt di vaybrɛshɔn, di tɛmpracha we de chenj chenj, ɛn di tin dɛn we de apin to di tin dɛn lɛk wata ɔ kemikal.
Yuz dɛn fɔ Fasteners .
Fasteners de ɔlsay na di industri ɛn aplikeshɔn dɛn:
Vehicle Assembly : Bolt, skru, ɛn rivet dɛn kin ol ɔtomotiv kɔmpɔnɛnt dɛn togɛda, frɔm bɔdi panɛl to injin pat dɛn.
Kɔnstrɔkshɔn ɛn bildin : nel, bolt, ɛn ankɔr dɛn kin mek di freym dɛn, draywal, ɛn ruf.
Furniture Assembly : Skru ɛn bolt dɛn impɔtant fɔ assemble fɔnicha fayn fayn wan.
Ilektroniks Manufakchurin : Smɔl skru ɛn fastɛns dɛn de mek shɔ se ilɛktronik kɔmpɔnɛnt dɛn kɔntinyu fɔ kɔnɛkt we nɔ gɛt damej.
Roofing Projects : Dɛn mek ruf nel ɛn skru fɔ bia wit di strɛs we de na di envayrɔmɛnt ɛn fɔ mek i nɔ lik.
Wud wok : Fastɛns lɛk wud skru dɛn de mek shɔ se dɛn gɛt strɔng, rili fayn jɔyn dɛn na kapɛnta prɔjɛkt dɛn.
Flooring Installation : Flooring nel ɛn skru dɛn de mek wud ɔ laminat sikyuɔr fɔ mek dɛn ebul fɔ sabflɔ, fɔ mek shɔ se i go de fɔ lɔng tɛm.
Di bɛnifit dɛn we pɔsin kin gɛt we i de yuz fastɛns dɛn na di say dɛn we dɛn de mek tin dɛn .
Fasteners de gi sɔm bɛnifit dɛn we dɛn de mek:
Inkris dizayn fleksibiliti : fasteners alaw fɔ izi fɔ disassembly ɛn ripɛnt, mɔ na kɔmpleks sistɛm dɛn lɛk ilɛktroniks.
Ridyus west : Yuz skru, nat, ɛn bolt de ridyus matirial west we yu kɔmpia am wit wɛldin ɔ adhesive.
Lɔwa Prodakt Weyt : Layt weit fastɛns dɛn de ɛp fɔ ridyus di ɔvala wet fɔ wan prodak, wan impɔtant tin fɔ tink bɔt na industri dɛn lɛk aerospace ɛn ɔtomotiv.
Kwaliti kɔnsidareshɔn ɛn standad dɛn .
Fɔ mek shɔ se di kwaliti fɔ di fastɛns dɛn gɛt fɔ du wit fɔ fala di standad dɛn we di industri gɛt, lɛk di wan dɛn we ASTM Intɛrnashɔnal ɔ ISO dɔn sɛt, fɔ mek dɛn go ebul fɔ du di wok fayn fayn wan, fɔ mek dɛn go de fɔ lɔng tɛm, ɛn fɔ mek dɛn sef. Factors lɛk tɛnsiɛl trɛnk, kɔrɛshɔn rɛsistɛns, ɛn taya layf fɔ tink bɔt we dɛn de pik fastɛns fɔ impɔtant aplikeshɔn dɛn.
Di tin dɛn we go apin tumara bambay na Fastener Tɛknɔlɔji .
Di nyu tin dɛn we dɛn dɔn mek na fastɛns tɛknɔlɔji na fɔ mek dɛn gɛt fasta we dɛn kin lɔk dɛnsɛf, fɔ mek dɛn kɔt kɔt dɛn we nɔ de rɔtin, ɛn di tin dɛn we dɛn kin yuz fɔ fast we dɛn mek wit tin dɛn we dɛn dɔn mek lɛk kabon kɔmpɔzit. Apat frɔm dat, ɔtomɛshɔn insay manufakchurin de drɛb dimand fɔ fastɛns we kin izi fɔ intagret insay ɔtomatik asɛmbli prɔses.
Dɔn
Fasteners na fondamental komponent dem fo plenti aplikeshon, from big-big konstrakshon to delika ilektroniks. We dɛn ɔndastand di difrɛn kayn fastɛns dɛn, dɛn dizayn ficha dɛn, di tin dɛn we dɛn de yuz, ɛn di we aw dɛn de mek tin dɛn de mek shɔ se dɛn pik di rayt fastɛns fɔ di wok. As teknɔlɔji de go bifo, di fastɛns dɛn go kɔntinyu fɔ adap, dɛn go gi mɔ efyushɔn, trɛnk, ɛn versatility na ɛvri industri.
Fɔ gɛt prɔblɛm fɔ pik di rayt fastɛns fɔ yu prɔjek dɛn? Wi de ya fɔ ɛp. Wi spɛshal pipul dɛn dɔn rɛdi fɔ gi di advays ɛn sɔpɔt we yu nid fɔ pik di pafɛkt fastɛns fɔ ɛni wok. Kontakt wi fɔ ajɔst to sucess!
FAQ dɛn .
1. Wetin na di difrɛns bitwin bolt ɛn skru?
Dɛn kin yuz bolt dɛn wit nat fɔ tay tu kɔmpɔnɛnt dɛn we dɛn nɔ trɛd togɛda, we dɛn kin yuz skru dɛn jɔs fɔ fast insay matirial dɛn dairekt wan, fɔ mek ɔ fɔ yuz trɛd dɛn we bin dɔn de bifo.
2. Wetin na di rizin fɔ was mashin we dɛn de yuz fɔ mek tin dɛn we dɛn de yuz fɔ was di klos?
Wan was mashin de sheb di lod fɔ di fastɛns, i de ridyus di frikshɔn bitwin di sɔfays dɛn, ɛn i de ɛp fɔ mek i nɔ lɔs bikɔs ɔf di vaybreshɔn ɔ di tɔk.
3. Ustɛm a fɔ yuz lɔk wasɔ?
Dɛn kin yuz was mashin dɛn na asɛmbli usay fastɛns dɛn kin gɛt vaybreshɔn ɔ muvmɛnt. Dɛn kin ɛp fɔ mek nɛt, bolt, ɔ skru nɔ lɔs as tɛm de go.
4. Us kayn fastɛns we bɛtɛ fɔ yuz na do?
stenlɛs stiɛl ɔ kɔt fastɛns (lɛk galvaniz ɔ zink-kɔt) na fayn tin fɔ yuz na do bikɔs dɛn nɔ gri fɔ rɔst ɛn kɔrɛshɔn.
5. Wetin na di kayn skru ed dɛn we dɛn kin yuz mɔ?
Di kɔmɔn skru ed dɛn na flat, pan, trɔs, heks, ɛn ed dɛn we gɛt dome. Di choice of head dipen pan di aplikeshɔn ɛn if yu nid di fastener fɔ sidɔm flush wit di surface ɔ protrude fɔ bɛtɛ grip.
6. Aw a go pik di rayt trɛd tayp fɔ mi fastɛns?
Kɔs trɛd dɛn na di bɛst fɔ kwik asɛmbli ɛn sɔft matirial, we fayn fayn trɛd dɛn de gi bɛtɛ holdin pawa ɛn dɛn de yuz dɛn na ay-stress aplikeshɔn dɛn.
7. Wetin na wan skru we de tap yusɛf?
Wan skru we de tap insɛf de mek in yon trɛd dɛn as dɛn de drɛb am insay matirial dɛn, we de pul di nid fɔ pri-dril. I fayn fɔ mek mɛtal ɛn plastic.
