Me yasa abs (acrylonitrile butyadiene buttony Styrene) ya kasance mai zuwa-zuwa kayan a masana'antar buga takardu 3 na shekaru uku? Kyakkyawan kayan aikin na injiniya, ƙarfin hali har zuwa 105 ° C, da ƙarfin sarrafa bayan-da za su iya samun zaɓi mai mahimmanci ga masu ƙira da masana'antu daidai.
Ko dai ƙwararren ƙwararru ne ko kuma mai son Hobbyist, fahimtar abubuwan da aka buga don fadada damar da kuka buga 3D. A cikin wannan shafin, zamu jagorance ku cikin duniyar sihiri na bugu na 3D tare da Abara, fahimta, da fa'idodi don yin zaɓi mafi kyau.
Me ke filastik?
Acrylonitrile butydana Styreen (Abs) ya juyar da masana'antu na masana'antu kafin fitowar tushen tushe a cikin fasahar buga littattafai na 3D. Tsarinsa na musamman, hada abubuwa uku daban-daban, yana ba da kaddarorin na inji. Nazarin yana nuna abs abubuwan haɗin kula da tsarin tsari a yanayin zafi har zuwa 105 ° C, mahimman madadin kayan madadin.
Aikace-aikace na Abs Buga
Masana masana'antu sun amince da Abs a yawancin abubuwan yau da kullun:
Kayan aiki (20% na kasuwa)
Masu amfani da kayan lantarki mai amfani (kasuwar 35%)
Kayan aikin gida (25% kasuwa)
Kayan aiki ($ 15% a kasuwa)
Sauran aikace-aikacen (5% kasuwa)
Masana'antu masana'antu tana nuna mahimman fasahar buga fasahar Micro. Kayan masana'antu Leverage Abs don:
Kayan aiki na al'ada da tsararraki suna rage farashin samarwa da 40%
Abubuwan aiki na aiki da gaske na duniya
Abubuwan da ake maye gurbin masana'antu akan buƙata, yankan farashi
Kayan aikin inganta kayan aikin inganta ingantaccen aiki da 25%
Aikace-aikacen Aikace-aikacen sun nuna karko da tsoratarwa da juriya da zafi:
| kayan | aikin amfani da amfanin | awo na aiki |
| Sassa na ciki | Heat bargle zuwa 105 ° C | 95% Rating Rating |
| Kwastomomi | Babban tasiri juriya | 200 J / M tasiri |
| Sassan samfuran | Darajar Shineer | Rage lokaci 70% |
| Kayan aikin sabis | Mai tsada | 60% tanadin kuɗi |
Na'urar lantarki ta amfana da abin da ya dace:
Abubuwan da Na'urar Na'urar Na'ura tare da kyakkyawan tasiri tasiri
Haske mai tsayayyen zafi don taron lantarki
Mafita hanyar samar da hanyar kasuwanci
Juyin Jaka don Ci gaban Samfurin
Aikace-aikace na likita da aikace-aikacen kiwon lafiya sun dogara da madaidaici: Aikace-aikace na Key:
Sarakunan gine-gine da ƙirar ƙira suna amfani da abs:
Abubuwan da aka gyara scale suna buƙatar karkara
Abubuwan Tsarin gine-gine na al'ada
Nunin Nunin Nuni
Abubuwan aiki na aiki don tsarin gini
Ayyukan Ilimi Leverage Leverage Properties:
Manufofin Injiniya
Kayan aikin Kimiyya
Kayan aiki masu ilimi
Ayyukan kirkirar ɗalibi
Aikace-aikace na bincike da ci gaba sun hada :
| Matsa | fa'idodin | da |
| Kimiyyar kayan aiki | Samfurin gwaji | Daidaitattun kaddarorin |
| Hanyar injiniya | Bayani | Darajar Shineer |
| Tsarin Samfurin | Tsarin ra'ayi | Mai tsada |
| Na bioming | Kayan aikin al'ada | Tsarin zane |
Masana'antu na musamman suna neman amfani na musamman:
Abvantbuwan amfãni na 3D bugu tare da Abara
Babban kaddarorin kayan aikin suna tsaye a matsayin ma'anar halayen Abs posted. Abubuwan da ke nuna abubuwan juriya na musamman, kai har zuwa 200 J / M, mafi yawan kayan buga littattafai na 3D. Thearfinsa na tarko ya koma daga 40-50 MPa, yana ba da samarwa da abubuwan da aka gyara aiki mai iya haifar da matsanancin damuwa na inji.
Mafi kyawun juriya na zafi yana sa abs wani kyakkyawan zaɓi don aikace-aikacen da ake buƙata. Abubuwan da ke haifar da tsarin da ya dace da tsarin har zuwa 105 ° C, da muhimmanci a kan (60 ° C) da bugun (85 ° C). Wannan kyakkyawan haƙurin haƙuri yana tabbatar da cewa sassan da aka buga sun kasance masu rauni a ƙarƙashin yanayin zafi, sa su dace da kayan aikin sarrafa motoci da kuma shigarwa na waje.
Zaɓuɓɓukan aikin ofis na haɓaka daban-daban don Abs Abs daga sauran kayan buga. Abu da sauri ya amsa ga:
Acetone turɓaya mai santsi, cimma daidaitaccen tsari
Ci gaba na fasahar sanding, bada izinin lafiya iko
Fenti mai rufi, exabling daban-daban
Injin inji, sakamakon shi da babban-sheki
Kyakkyawan farashi mai mahimmanci ya sanya abs Abs a matsayin zaɓi na tattalin arziƙi. Binciken kasuwa ya nuna:
| farashi | darajar |
| Albarkatun kasa | $ 20-25 / kg |
| Lokacin sarrafawa | 15% sauri fiye da PL |
| Madadin lalacewa | 10% karancin kayan tallafi |
| Kudin aiki | 30% kasa da madadin |
Ingantaccen aikace-aikacen yana nuna daidaituwar Abin a kan masana'antu. Abubuwan da suka fifita su a:
Sassan motoci suna buƙatar babban tasiri
Hoton Kayan Wuta mai amfani da kayan lantarki suna buƙatar kwanciyar hankali
Kayan aikin masana'antar masana'antu da kuma gyara
Ci gaban samfurin yana buƙatar karkara
Magungunan masana'antu na al'ada
Haɗin kadarorin suna sanya abs a matsayin zaɓin aikace-aikacen bugun aikace-aikacen 3D, musamman ma ƙarfi, juriya da zafi, da kuma tasiri mai mahimmanci sune la'akari.
Iyakoki da kalubalen Abs filastik
Tsarin zafin jiki na zazzabi:
Gudun Wawara: 3 ° C / minti na mintina
Mafi kyau duka yanayin zafin jiki: 50-60 ° C
Bambancin zafin jiki mai mahimmanci: <15 ° C
Kwatsancin muhalli sun hada da:
Voo watsi har zuwa 200 μg / M⊃3; Yayin bugawa
Ratean tsayawar danshi: 0.3% a cikin sa'o'i 24 a 50% rh
CO Mai Inganta Mai Girma: 95 × 10 ^ -6 MM / MM / ° C
Babban saiti
3D Buƙatar bukatun
Nasarar Abs Fitar da ke buƙatar takamaiman tsarin kayan aiki:
Mahimmancin kayan aikin:
Mai zafi mai zafi (mafi karancin 110 ° C karar)
An rufe kowace shekara (bambancin zazzabi <5 ° C)
Duk-Karfe Hotend (Rated> 260 ° C)
Tsarin Filtration Air
Buga shiri
Nasarar da iska tana buƙatar shiri na farfajiya. Bincike yana nuna ingantacciyar shirin da ya dace zai iya ƙara yawan nasarar farko-Layer ta kashi 85%.
Zaɓin
| Surfofin | Kwatancen | Ka'idodi | |
| Gilashin + Abs slurry | 95% | M | M |
| Pei | 90% | Da kyau sosai | Matsakaici |
| Mabuɗin Kapton | 85% | M | M |
| Gina | 80% | M | Matsakaici |
Matakan shirye-shiryen:
Tsaftace Tsabtace (isopropyl barasa> 99%)
Tsawo zazzabi (minti na mintina 15
Aikace-aikacen Ingilishi
Tabbatarwa matakin (± 0.05mm haƙuri)
Ikon muhalli
Gudanar da zazzabi ya tabbatar da mahimmancin nasarar shiga. Nazarin da aka nuna sunayensu suna iya rage warping da kashi 78%.
Mahimmancin ƙimar muhalli:
Commer zazzabi: 45-50 ° C
Muryar zafin jiki: <2 ° C / Sa'a
Yankin zafi: 30-40%
Yankin Jirgin Sama: 0.1-0.2 M / S
Bugu na bugu da saiti da saiti na bugu na 3D tare da Abs
Gudanar da zazzabi
Mafi kyau duka zafin jiki iko yana da muhimmanci tasiri da ingancin ɗab'i. Bincike yana nuna cancantar ingancin zazzabi zai iya rage lahani da kashi 65%.
Zasusuwar zazzabi:
Abubuwa masu mahimmanci:
Saitunan Buga
Gwajin da aka nuna yana bayyana sigogi na musamman don Abs:
| Paramet | da aka ba da shawarar | faɗakarwa akan inganci |
| Saurin bugawa | 30-50 mm / s | M |
| Tonight | 0.15-0.225Mmm | Matsakaici |
| YADDA | 1.2-2mm | M |
| Yankunan Infill | 20-40% | Matsakaici |
Shawarar Fanning:
Farkon Jarida
Nasarar farawa ta farko ta tasirin tasirin da aka buga gaba ɗaya. Bincike na ilimin lissafi yana nuna daidai lokacin saiti na farko na farashin nasara ta 90%.
M haspersments:
Z-Kashe: 0.1-0,5mm Layer: 0.2-0.3mm layi daya: 120-130mm layi daya: 120-130% matakin gado: ± 0.02mm
Shirya matsala ga sabobin gama gari na bugu na 3D tare da Abs
Buga matsaloli masu inganci
Bincike yana gano hanyoyin digiri na farko da mafita:
Binciken Bincike na kowa:
| Batun | Fimearfafa | Friquencaukaka Sakamakon | nasarar nasarar bayan Gyara |
| Yawo | 45% | Zazzabi delta | 85% |
| Rabuwa | 30% | Talauci na yau da kullun | 90% |
| Lahani | 15% | Danshi | 95% |
| Rashin daidaituwa | 10% | Daidaituwa | 98% |
Al'amuran da suka shafi duniya
Danshi tasirin danshi:
Kudin kashe: 0.2-0.3% kowace rana
Rage ƙarfi: har zuwa 40%
Degradation mai inganci: bayyane bayan 2% danshi abun ciki
Buga gazawar karuwa: 65% tare da zanen rigar
Halin ajiya:
zazzabi: 20-25 ° Ciki Yanayi: <30% iska mai iska: Airtal nau'in
Kalubalen muhalli
Kulawa da muhalli yana tasiri kan nasara ga nasara:
Tasri abubuwa:
Yawan zafin jiki (± 5 ° C = 70% na gazawa)
Tallacewar fallasa (> 0.3 M / s = 85% gazawa)
Bambancin gumi (> 50% RH = 60% rage inganci)
Voc tarawa (> 3 ppm = hadarin lafiya)
Hanyoyin aiki na Buga don Abs Buga
Farfajiya
Proseclive Sanding Sanding Forms da Gidajan Tsarin Tsara. Fara da sandpe 120-grit Sandon don fara cirewa na farawa, a hankali ci gaba zuwa 240, 400, da kuma 800 ya cika. Wannan tsarin tsarin yana tabbatar da ci gaban ƙasa da sutura ba tare da an bijirar da tsarin zama mai tsari ba.
Kayan aikin kayan aiki da kayan da ake buƙata don sakamako masu ƙwararru sun haɗa da:
| takamaiman | takamaiman kayan | aikin |
| Abs | Rigar / bushe sandpaper (120-2000 Grit) | Farashin ƙasa |
| Kayan aikin wutar lantarki | M sander yashi | Babban aiki aiki |
| Kayan aikin hannu | Sanding Tubalan, fayiloli | Daki-daki |
| Kayan aiki | Ciwon ƙwallon ƙafa, ƙwayoyin microfiber | Gama ƙarshe |
Hanyoyin samar da shirye-shiryen da suka inganta suna inganta ingancin yanki fiye da sanding na asali:
Inji mai amfani ta amfani da ƙafafun fili
Yankewa tare da pastes lu'u-lu'u
Micro-raga padding don matsanancin ƙarewa
Fasahar kayan aikin jeri na cikakken wuraren
Magani na sinadarai
Tsarin sutturar Acetone Acetone suna sadar da mafi kyawun ƙwararru:
sigogi na asali: zazzabi na safe: 20+ mintina charse: 2l a kowace 100cm³ kashi
Vapor suttura mai aminci mai santsi yana buƙatar babban bidi:
Tsarin samun iska mai dacewa
Amfani da Jirgin Sama na Sakantawa
Kulawa da zazzabi
TAFIYA TAFIYA
Kulawa da Tsallaka Matsayi
Hanyoyin aikace-aikacen aikace-aikace sun bambanta dangane da rikice-rikice:
Kai tsaye tururi mai ƙarfi don sauƙin geometries
Kulawa da Kulla
Aikace-aikacen Brush don Sloting
Dibing dabara don daidaituwa
Taro da ƙarewa
Bawan fasahohi Keɓaɓɓen:
| Sharuɗɗan | Hanyar Aikace | -aikacen Hanyar | Mafi Kyawun Case |
| Sallovent Welding | Sosai babba | 5-10 min | Kayan haɗin gwiwa |
| Bankin Thermal | M | 15-20 min | Manyan saman |
| M shiga | Matsakaici | 30-45 min | Maƙasu-hadaddun taro |
Tsarin tsari na farfajiya don ingantaccen sakamako:
Tsabtace na inji (120-grit absion)
Chememer digiri
Jiyya na kunna kunnawa
Aikace-aikacen farko
Shirye-shiryen fenti
Jagororin Babban Taro na ƙarshe suna tabbatar da sakamako na ƙwararru:
Tabbatar da Kuɗi ta amfani da Jigs
Gudanar da Majalisar Daidaita
Matsalar damuwa
Abubuwan da ke tattare da daidaitawa
Hanyoyin gwaji
Zaɓuɓɓukan saman farfajiya suna ba da damar kammala yiwuwar samun damar:
Dabarun aikace-aikacen farko
Parfafa Zamani
Share hanyoyin kariya na gashi
Tsarin aikace-aikacen zane
Mafi kyawun ayyuka da tukwici
Kayan aiki
Yanayin adana yanayi:
yanayi mai kyau: 20-22 ° CRICEWER: 25-30% Haske mara nauyi: 0.5-1.0
Ingancin tabbatarwa mai inganci:
Motsa jiki na mako-mako
Tabbatar kadar dukiya
Kulawa da Muhalli Yanada
Canza na yau da kullun
Buga ingantawa
Bayanai na Inganta:
| Ingantaccen Tsarin | Tasirin Tasirin | Zuba Jari | na Rating |
| Yawan zazzabi | + 40% | 2 hours | M |
| Retraction tuning | + 25% | 1 awa | Matsakaici |
| Ingantaccen Ingantawa | + 20% | 3 hours | M |
| Gyara Resta Gyara | + 15% | Minti 30 | Sosai babba |
Gwajin Buga Buga:
Hasumiyar zazzabi (45 minti)
Gwajin ramawa (minti 30)
Birgima gwajin (minti 20)
Yawan kimantawa (minti 25)
Aminci la'akari
Abubuwan da ake buƙata na Tsaro:
Memitrics mai mahimmanci na aminci:
Aikin musayar iska: 6-8 m
VOC bakin kofa: <50 ppm
BARNITTURIRIRTAFIN FLTRSTRES: 0.3μm A 99,97%
Lokacin amsawa na gaggawa: <30 seconds
Ƙarshe
Tushen tafiya ta hanyar bugun 3D ta bayyana duka kalubalensa da kuma damar da ke da muhimmanci. Yayinda yake buƙatar kulawa da hankali ga sarrafa zafin jiki, samun iska, da saitunan buga, lada na Master Abs Sugawa suna da mahimmanci. Haɗin da ba a haɗa shi ba na karko, juriya da zafi, da sassauci mai saurin aiki yana ci gaba da haɓaka haɓaka masana'antu a kan masana'antu.
A matsayin fasahar masana'antu da kisantawa ta masana'antu, Abs ya kasance a gaba, daidaita ga sababbin aikace-aikace da kalubale. Nan gaba na Inchet ya yi rawa, tare da ci gaba mai gudana a cikin ilimin kimiyyar kayan aiki da buga fasahar har ma da yawaitar masarufi don wannan hanyar masar.
Shirya don ɗaukaka wasan buga 3D tare da Abs? Teamungiyar MFG tana kawo muku kwararrun masu buga kayan aiki da shekarun masana'antu. Daga saɓa zuwa samarwa, za mu taimaka muku Buɗe Absalan Abincin Abs. Tuntuɓi ƙwararrun masana yau ko ziyarar aiki Team na Mfg don tattaunawa kyauta.
Takamatsu
3D bugu
Abs filastik
3D RUHU LITTAFIN 3D
Tambayoyi akai-akai: 3D Fitar da Abs
Q1: Me yasa Abs Abs ya buga warp?
A: Wiwi na faruwa daga sanyaya mara kyau. Yi amfani da gado mai zafi (100-110 ° C), an rufe ɗakunan ajiya, da kuma mafi kyawun tabbacin mafita.
Q2: Shin Absxic?
A: Ee, Abs Setarfafa ya tashi yayin bugawa. Koyaushe yi amfani da iska da kuma shinge. Guji tsawan wahala.
Q3: Menene kyakkyawan zazzabi?
A: bututun ƙarfe: 230 ° C
Bed: 100-110 °
Catber: 45-50 ° C
Q4: Me yasa zan buƙaci shinge?
A: Haɗawa yana kula da zazzabi, yana hana warping, suna ɗauke da laima, kuma inganta ƙaddarar Layer.
Q5: Ta yaya zan kunna Abs?
A: A cikin kwantena na Airthight tare da Desigant a 20-25 ° C, a kasa 30% zafi.
Q6: Mafi kyawun hanyar da ya dace da abs?
A: ko dai acetone turɓaya mai santsi (mai sauri, mai sheki) ko yashi mai ci gaba (ƙarin iko).
Q7: Me ya sa aka buga kwafi?
A: yawanci daga filament, low zazzabi, ko talauci mara kyau. Bushe filament da ƙara yawan zafin jiki don gyara.
